Business news · Spotlight
Neoson Tube Amplifiers at Decibel+: Single-Ended KT88 Sound From France
There's a corner of the hi-fi world that measures power in single digits and doesn't apologize for it. Single-ended tube amplifiers trade raw wattage for purity, and Neoson, a small French workshop, builds nothing else. Decibel+ carries both of Neoson's integrated amplifiers, the Genèse and the Evolution. Here's what single-ended design means, what sets these two amps apart and how to pair them with the right speakers.
A one-designer French workshop
Neoson is an artisan company based in Caen, Normandy. According to its about page, designer Walter Blondel spent about 20 years developing its products before bringing them to market. Neoson commits to a single architecture: single-ended tube amplification in pure class A, built around the KT88 power tube. In France, it sells through a network of listening-room dealers rather than online, and its dealer list includes a U.S. contact at Decibel+'s phone number.
Neoson also stresses that its amplifiers are built to last and to be repaired, a point Decibel+ echoes on its Neoson page.
What single-ended means
Most amplifiers split the music signal between pairs of output devices that take turns, one handling the top of the waveform and one the bottom. That's efficient, but the handoff can add what's called crossover distortion. In a single-ended amp, the output tube handles the whole waveform on its own and runs in class A, so there's no handoff at all. Neoson says the signal passes through a minimum of material between the input and the speaker.
The tradeoff is power. A single-ended KT88 amp makes far fewer watts than a big solid-state design. Neoson's view, from its Genèse page, is that "less watts, but exceptional watts" reveal more texture and presence in each instrument.
Genèse: where the line begins
The Genèse ($7,885 at Decibel+) is Neoson's first amplifier and the one Decibel+ features on its homepage. Its key specs, from Neoson and Decibel+:
- 2 × 10 watts RMS into 8 ohms, pure class A
- Two PSVANE 12AX7-S Art tubes in the preamp stage and two PSVANE KT88 TII Art power tubes
- Mundorf MCap Evo Silver Gold coupling capacitors between the stages
- Three RCA line inputs and 4 or 8 ohm speaker outputs
- Motorized ALPS volume control with an infrared remote
- Preamp and amplifier stages mounted on vibration absorbers
Neoson says each Genèse is measured before it ships and comes with its own test certificate. That certificate lists the serial number, identifies its two KT88 tubes and includes oscilloscope readings at three test frequencies. The company also specifies channel matching within 0.2 dB from 20 Hz to 20 kHz.
Evolution: double the tubes, double the power
The Evolution ($11,828) is described by Decibel+ as a worthy successor to the Genèse. It's a "double single-ended" design, with two KT88 tubes working in parallel on each channel, four in all. That raises output to 2 × 20 watts RMS in pure class A while keeping the single-ended approach. It steps up to Mundorf's MCap Supreme Evo Silver Gold capacitors and adds vibration absorbers under the transformers and power tubes. Decibel+ says it offers fluid, natural timbre and a wide, deep soundstage.
Pairing: speakers matter
Ten or 20 watts goes a long way with the right speakers and not very far with the wrong ones. Single-ended amps shine with high-sensitivity speakers, and that's where Decibel+'s lineup fits together. The Atlantis Lab AT PRO speakers it carries are rated from 92 to 101 dB, and most list a minimum recommended amplifier power of just 6 watts. Atlantis Lab founder Eric Buy is quoted on Neoson's site saying the Genèse surprised him with its transparency at both low and high volume.
A few practical notes before you buy. Both amps run on 230 V by default, with 115 V versions available on request, so confirm the U.S. version when you order. Tube amps also run warm and draw steady power, about 160 watts for the Genèse and 260 for the Evolution, so give them room to breathe.
Listen, then decide
See both amplifiers in the Neoson collection at Decibel+. If you're not sure whether 10 or 20 watts is right for your speakers and room, call the Decibel+ team at (702) 710-0074 or send a note through the contact page. They can help you match a Neoson amp to your system.