Business news · Spotlight
Soulnote at Decibel+: Japanese Amps, DACs and Phono Stages Tuned by Ear
Most audio companies design to the measurement sheet. Soulnote designs by ear, and it says so openly. The Japanese brand builds amplifiers, digital-to-analog converters and phono stages around a philosophy that breaks with how most high-end gear is engineered. Decibel+ carries seven of its current "ver.2" components, enough to build a complete Soulnote system from the turntable or streamer to the speakers. Here's what makes the brand different and how the lineup fits together.
Who makes Soulnote
Soulnote is based in Sagamihara, Kanagawa, Japan. According to the company's philosophy page, it was founded in 2004 by former Marantz Japan engineers and employs about 50 people. Its chief sound director, Hideki Kato, has been designing audio equipment since the late 1980s and worked on NEC's A-10 amplifiers and Philips' LHH series. Soulnote describes its products as engineered in Japan and hand assembled there.
The idea behind the sound: dynamic performance
Kato kept running into the same puzzle. Better numbers on the test bench didn't always mean better sound in the listening room. His answer was a concept Soulnote calls dynamic performance, which puts the timing accuracy of the original waveform ahead of conventional static measurements.
Two design choices come out of that idea:
- No negative feedback. Most amplifiers use negative feedback (NFB) to lower distortion on paper. Soulnote's amplifiers use fully discrete circuits without it. The company admits this can make some conventional measurements look worse, but says it improves how music actually sounds.
- Non-oversampling (NOS) digital. Soulnote's DACs offer a NOS mode for PCM playback. The company explains that the usual oversampling filters add tiny "pre-echoes" and "post-echoes" around each sound. NOS mode avoids them, which Soulnote says keeps timing information intact.
Soulnote is clear that this is a listening-first approach. Circuits, parts and even the mechanical construction are chosen by ear. That's an unusual stance in a hobby that loves specs, and it's why the brand has a devoted following.
What Decibel+ carries
| Component | What it is | Decibel+ price |
|---|---|---|
| A-0 ver.2 | Integrated amp, 10 W × 2 (8 Ω), plus a headphone output | $2,939 |
| A-1 ver.2 | Integrated amp, 40 W × 2 (8 Ω), 80 W × 2 (4 Ω) | $4,845 |
| A-2 ver.2 | Integrated amp, 80 W × 2 (8 Ω), 160 W × 2 (4 Ω) | $9,420 |
| D-1 ver.2 | DAC, up to 768 kHz PCM and 22.6 MHz DSD over USB | $4,555 |
| D-2 ver.2 | Twin-mono DAC with external clock input | $9,085 |
| E-1 ver.2 | Phono stage for MM, MC and optical cartridges | $5,380 |
| E-2 ver.2 | Phono stage with adjustable EQ curves | $9,910 |
The A-2 ver.2: the heart of a system
The A-2 ver.2 is deliberately simple, essentially a power amplifier with an input selector and volume control. Soulnote's A-2 ver.2 page says its output stage uses the same parallel push-pull design and hand-matched TO-3P transistors as the company's flagship A-3. The power transformer's output voltage was intentionally lowered to favor current delivery into low-impedance speakers over maximum power at 8 ohms. Volume runs through a relay-switched attenuator of precision resistors, which Soulnote says keeps the sound clear even at low listening levels. Soulnote's site reports that the A-2 ver.2 won a best amplifier award in a luxury-class category.
Digital and vinyl
The D-2 ver.2 uses two ESS ES9038PRO chips per channel in a twin-mono layout, with a separate power supply for each channel. It switches between conventional oversampling and NOS mode, and it takes a 10 MHz external clock if you want to go further. Inputs include USB, coaxial and AES/EBU.
For vinyl, the E-1 ver.2 handles moving-magnet and moving-coil cartridges and adds an input for optical cartridges, which is rare in this class. Its MC input can run fully balanced over XLR, and MC load is adjustable from 3 ohms to 1 kilohm. The E-2 ver.2 steps up with selectable equalization curves for older records pressed before the RIAA standard took hold.
Who it's for
Soulnote is a good match for listeners who care more about timing, texture and realism than about the lowest distortion figure on a spec sheet. The A-0 ver.2 is a compact way in, with a built-in headphone amp. The A-2 ver.2 has the current to drive demanding speakers. Pairing a Soulnote DAC or phono stage with the matching amplifier keeps the whole chain built on the same no-feedback design. Ask about pairing with the Atlantis Lab speakers Decibel+ also carries.
Hear it for yourself
Browse the full Soulnote collection at Decibel+, in black or silver finishes. For help choosing components or confirming voltage and setup for your system, call (702) 710-0074 or reach out through the Decibel+ contact page.